Safety Systems — SIS, ESD, F&G, BMS, HIPPS

Capability

SIS, ESD, fire & gas and BMS engineeringto IEC 61511.

ATG's principal held the plant-wide sole SIS engineer position on a twenty-seven-controller ProSafe-RS system for seven years. That is the standard we bring to every safety scope — from a single burner management system to a plant-wide safety system digitalisation for Saudi Aramco.

Detect early. Act correctly. Prove it.

What ATG delivers

Scope we takeunder our own contract.

  • Safety requirement specification, cause and effect matrices and SIL-rated architecture (1oo2, 2oo3) selection.
  • ESD, fire and gas, burner management and HIPPS application programming with independent verification.
  • Fire and gas detection layout, detector selection, voting logic, alarm and mimic panels and suppression interfaces.
  • Safety system data integration and dashboarding — proof-test tracking, bypass and demand logging — without touching the safety logic.
  • Integrated FAT with the DCS, SAT, cause and effect validation and site commissioning.
  • Proof-test procedures, functional safety assessment support and management of change after handover.

Platforms and vendors supported

  • HIMA HIMatrix & HIMax
  • Triconex Tricon & Trident
  • Yokogawa ProSafe-RS
  • Honeywell Safety Manager & FSC
  • Emerson DeltaV SIS
  • ABB 800xA High Integrity
  • Siemens S7 F-series

Standards applied

  • IEC 61508
  • IEC 61511 / ISA 84
  • NFPA 72 & 85 (fire alarm, BMS)
  • ISA 18.2 (alarms)
  • IEC 62443

Typical scope of work

From the first meetingto the handover dossier.

Detect early. Act correctly. Prove it.

  • SpecifySRS, SIL allocation from LOPA, C&E matrices, architecture and hardware selection.
  • EngineerApplication logic, HMI faceplates, sequence-of-events, bypass management, proof-test design.
  • ValidateIndependent logic review, integrated FAT, C&E validation, SAT with witness points.
  • CommissionLoop and trip testing, interface testing with DCS and packages, start-up support.
  • SustainProof testing, demand and bypass records, FSA support, documented MOC.

Where we work

Al-Khobar to Yanbu,and on rotation worldwide.

Kingdom of Saudi Arabia

Own Saudi entity and employer file; established mobilisation to Al-Khobar, Dammam, Jubail, Yanbu, Jeddah, Rabigh, Riyadh. Works under the client or plant project insurance.

International

Engineering and commissioning teams under long- and short-form agreements — residential, rotational and offshore — supported from Al-Khobar and Lahore.

Related projects

Claim,then evidence.

All 79 references
In-Kingdom
Saudi Aramco (Khurais)

Khurais — plant-wide safety system digitalisation

Saudi Arabia2026
In-Kingdom
Saudi Aramco (Jafurah, Shedgum GOSP)

Remote engineering support — gas plant BMS and GOSP control systems

Saudi Arabia2023–2025
International
Shell Nigeria — Forcados Island

HIMA SIL 4 safety system commissioning

Nigeria2021

Frequently asked

Questions buyers askbefore the shortlist.

Which safety PLC platforms has ATG commissioned?

HIMA (including a SIL 4 system for Shell Nigeria), Triconex, Yokogawa ProSafe and ProSafe-RS, Honeywell Safety Manager and Emerson DeltaV SIS. We are currently executing the HIMA scope of a plant-wide safety system digitalisation at Saudi Aramco Khurais.

Do you deliver the HAZOP, LOPA and SIL studies as well?

Yes — see our functional safety studies page. Independent facilitation is delivered separately from the implementation so the assessment stays independent.

Can you work on a live plant?

Yes. Online modification, bypass-managed testing and hot cutover on operating assets are the norm for our safety-system work.

Start a conversation

Tell us whatyou need built.

Send the scope, the P&IDs or just the problem. A control-systems engineer — not a sales desk — replies from Al-Khobar, normally within one working day.

Al-Khobar head office

+966 59 350 1825 · +966 53 849 2308
Proposals sales@atgpa.com
General inquiries@atgpa.com
Technical support techsupport@atgpa.com
WhatsApp